Penerangan Produk
CZPT rollers enhance rotation on the bushing while reducing impact loads on the sprocket tooth during operation.
All components are heat treated to achieve maximum strength. All components are heat treated to achieve maximum strength.
Dimuatkan terlebih dahulu semasa proses pembuatan untuk meminimumkan pemanjangan awal.
Pelinciran celup panas memastikan pelinciran 100% pada semua komponen rantai bagi memanjangkan jangka hayat dan mengurangkan kos penyelenggaraan.
| CHC TIDAK. |
PITCH | BUSH LEBAR |
PENGGELUNG DIA |
PIN | PLAT | MIN. KEKUATAN |
AVG. KEKUATAN |
MAX. KEKUATAN |
TRANS PITCH |
|||
| d | L | LC | H | T | ||||||||
| mm | mm | mm | mm | mm | mm | mm | mm | kgf | kgf | kgf | mm | |
| C35-1 | 9.525 | 4.68 | 5.08 | 3.60 | 12.15 | 13.40 | 8.80 | 1.25 | 800 | 1,100 | 220 | NIL |
| C40-1 | 12.700 | 7.85 | 7.92 | 3.98 | 17.80 | 21.00 | 12.00 | 1.50 | 1,420 | 1,950 | 370 | NIL |
| C50-1 | 15.875 | 9.40 | 10.16 | 5.09 | 21.80 | 25.00 | 15.00 | 2.00 | 2,200 | 3,100 | 650 | NIL |
| C60-1 | 19.050 | 12.58 | 11.91 | 5.96 | 26.90 | 31.00 | 18.00 | 2.35 | 3,190 | 4,200 | 920 | NIL |
| C80-1 | 25.400 | 15.75 | 15.87 | 7.94 | 33.50 | 38.00 | 24.10 | 3.20 | 5,680 | 7,500 | 1,500 | NIL |
| C100-1 | 31.750 | 18.90 | 19.05 | 9.54 | 41.10 | 47.00 | 30.10 | 4.00 | 8,870 | 12,100 | 2,300 | NIL |
| C120-1 | 38.100 | 25.23 | 22.22 | 11.11 | 50.80 | 57.00 | 36.20 | 4.70 | 12,770 | 16,000 | 3,100 | NIL |
| C140-1 | 44.450 | 25.23 | 25.40 | 12.71 | 54.90 | 62.00 | 42.20 | 5.50 | 17,380 | 21,000 | 4,100 | NIL |
| C160-1 | 50.800 | 31.55 | 25.87 | 14.29 | 65.50 | 73.00 | 48.20 | 6.40 | 22,700 | 30,000 | 5,400 | NIL |
| C40-2 | 12.700 | 7.85 | 7.92 | 3.98 | 32.30 | 36.20 | 12.00 | 1.50 | 2,840 | 3,900 | 630 | 14.38 |
| C50-2 | 15.875 | 9.40 | 10.16 | 5.09 | 39.90 | 44.00 | 15.00 | 2.00 | 4,440 | 6,200 | 1,100 | 18.11 |
| C60-2 | 19.050 | 12.58 | 11.92 | 5.96 | 49.80 | 54.40 | 18.00 | 2.35 | 6,380 | 8,400 | 1,530 | 22.78 |
| C80-2 | 25.400 | 15.75 | 15.87 | 7.94 | 62.70 | 68.10 | 24.10 | 3.20 | 11,360 | 15,000 | 2,550 | 29.29 |
| C100-2 | 31.750 | 18.90 | 19.05 | 9.54 | 77.00 | 83.10 | 30.10 | 4.00 | 17,740 | 24,200 | 3,900 | 35.76 |
| C120-2 | 38.100 | 25.23 | 22.22 | 11.11 | 96.30 | 102.90 | 36.20 | 4.70 | 25,540 | 32,000 | 5,250 | 45.44 |
| C140-2 | 44.450 | 25.23 | 25.40 | 12.71 | 103.60 | 111.00 | 42.20 | 5.50 | 347,600 | 42,000 | 6,970 | 48.87 |
| C160-2 | 50.800 | 31.55 | 28.57 | 14.29 | 124.20 | 132.10 | 48.20 | 6.40 | 57,460 | 60,000 | 9,150 | 58.55 |
| Penggunaan: | Transmission Chain, Conveyor Chain, Roller Chain |
|---|---|
| Bahan: | Aloi/Keluli Karbon |
| Rawatan Permukaan: | Penggilapan |
| Ciri: | Tahan Haba |
| Saiz Rantai: | 3/8"*2" |
| Struktur: | Rantai Penggelek |
| Penyesuaian: |
Tersedia
| Permintaan Tersuai |
|---|
What are the advantages of using a slat conveyor chain?
A slat conveyor chain offers several advantages in material handling and conveying applications. Here are some key benefits:
1. Heavy-Duty Capacity:
– Slat conveyor chains are designed to handle heavy loads and can withstand rigorous industrial environments.
– They are commonly used in applications that require transporting large, bulky, or irregularly shaped items, such as automotive parts, pallets, or containers.
2. Flexibility:
– Slat chains can be customized and configured to suit specific conveying requirements. They are available in various widths, lengths, and chain configurations to accommodate different product sizes and shapes.
– The modular design of slat chains allows for easy modification or expansion of the conveyor system as production needs change.
3. Versatility:
– Slat chains can be used in both horizontal and inclined conveying applications. They are capable of moving products up or down slopes, making them suitable for production lines with varying elevations.
– These chains can be integrated with curves, turns, merges, and diverters to create complex conveying systems that optimize space utilization and product flow.
4. Durability and Longevity:
– Slat chains are typically made from robust materials such as steel or plastic, providing excellent durability and resistance to wear and tear.
– They can withstand demanding operating conditions, including high temperatures, corrosive environments, or exposure to chemicals.
5. Low Maintenance:
– Slat conveyor chains require minimal maintenance compared to other types of conveyor systems. They have fewer moving parts and typically operate with reduced friction.
– With proper lubrication and periodic inspection, slat chains can maintain their performance and reliability over an extended service life.
6. Easy Cleaning:
– The open design of slat chains allows for easy cleaning and debris removal. They are suitable for applications that require frequent sanitation or hygiene maintenance, such as in food processing or pharmaceutical industries.
Overall, using a slat conveyor chain offers the advantages of high load capacity, flexibility in design, versatility in conveying applications, durability, low maintenance requirements, and ease of cleaning. These features make slat chains an effective solution for various industries requiring efficient and reliable material handling.
Bagaimanakah rantai penghantar menyumbang kepada kecekapan pengeluaran keseluruhan?
Rantai penghantar memainkan peranan penting dalam meningkatkan kecekapan pengeluaran keseluruhan dalam pelbagai industri. Berikut adalah cara ia menyumbang kepada kecekapan:
1. Aliran Bahan Berterusan: Rantai penghantar membolehkan aliran bahan yang berterusan dan tidak terganggu dari satu titik ke titik yang lain. Ia menghapuskan keperluan pengendalian manual atau pengangkutan barang, sekali gus mengurangkan masa henti dan kelewatan dalam proses pengeluaran.
2. Peningkatan Daya Penghantar: Dengan mengautomasikan pengendalian bahan, rantai penghantar membolehkan pergerakan barang yang lebih pantas dan cekap. Ia membolehkan daya pemprosesan dan kadar pengeluaran yang lebih tinggi, memaksimumkan penggunaan sumber dan mengurangkan masa kitaran.
3. Peningkatan Produktiviti: Dengan rantaian penghantar, pekerja boleh memberi tumpuan kepada tugasan nilai tambah dan bukannya pengendalian bahan secara manual. Ini membawa kepada peningkatan produktiviti kerana pekerja boleh menumpukan perhatian kepada operasi yang lebih mahir dan kritikal.
4. Peruntukan Sumber yang Cekap: Sistem rantaian penghantar yang direka bentuk dengan baik mengoptimumkan penggunaan ruang, membolehkan susun atur dan pengaturan kawasan pengeluaran yang cekap. Ia membantu dalam memperkemas aliran kerja dan meminimumkan pembaziran sumber seperti ruang lantai, tenaga kerja dan peralatan.
5. Kawalan Kualiti: Rantai penghantar boleh disepadukan dengan stesen pemeriksaan atau proses automatik untuk memastikan kawalan kualiti pada pelbagai peringkat pengeluaran. Ini membantu dalam mengesan dan membetulkan sebarang kecacatan atau ketidakkonsistenan, sekali gus mengurangkan kemungkinan produk yang rosak sampai ke pasaran.
6. Mengurangkan Kos Pengendalian Bahan: Dengan menghapuskan atau meminimumkan pengendalian bahan manual, rantai penghantar mengurangkan kos buruh yang berkaitan dengan pengangkutan, pengangkatan dan pembawaan barang. Ia juga meminimumkan risiko kecederaan atau kemalangan yang berkaitan dengan pengendalian manual.
7. Fleksibiliti dan Kebolehsuaian: Rantai penghantar boleh disesuaikan untuk memenuhi keperluan pengeluaran tertentu. Ia boleh direka bentuk untuk menampung pelbagai jenis produk, mengendalikan pelbagai kapasiti beban dan menyesuaikan diri dengan perubahan dalam permintaan pengeluaran. Fleksibiliti ini membolehkan penyepaduan yang lancar dengan sistem pengeluaran sedia ada dan skalabiliti yang mudah.
8. Keselamatan dan Ergonomik: Rantai penghantar menggabungkan ciri-ciri keselamatan seperti pelindung, butang berhenti kecemasan dan saling kunci untuk memastikan keselamatan pekerja. Ia juga menggalakkan amalan ergonomik dengan mengurangkan ketegangan fizikal pada pekerja dan meminimumkan risiko kecederaan muskuloskeletal.
Secara keseluruhannya, sistem rantaian penghantar yang direka bentuk dengan baik dan diselenggara dengan betul meningkatkan kecekapan pengeluaran dengan mengoptimumkan aliran bahan, meningkatkan daya pemprosesan, meningkatkan produktiviti, mengurangkan kos, memastikan kawalan kualiti dan mengutamakan keselamatan pekerja.
What are the maintenance requirements for a conveyor chain?
Maintaining a conveyor chain is essential to ensure its smooth operation and prolong its lifespan. Here are some key maintenance requirements for a conveyor chain:
- Regular Cleaning: Clean the conveyor chain regularly to remove dirt, debris, and contaminants that can contribute to chain wear and reduce performance. Use appropriate cleaning agents and tools to avoid damaging the chain.
- Pelinciran: Apply the recommended lubricant to the conveyor chain according to the manufacturer’s guidelines. Lubrication helps reduce friction, minimize wear, and prevent corrosion.
- Tension Adjustment: Check the tension of the conveyor chain regularly and adjust it if necessary. Proper tension ensures smooth operation and prevents issues like chain slipping or excessive wear.
- Inspection: Conduct regular inspections of the conveyor chain to identify any signs of wear, damage, or misalignment. Look for issues such as worn sprockets, elongation, bent or damaged links, and loose connections. Address any problems promptly to prevent further damage.
- Replace Worn Components: If any components of the conveyor chain, such as links, pins, or sprockets, are excessively worn or damaged, they should be replaced. Using worn components can compromise the chain’s performance and lead to failure.
- Alignment: Ensure proper alignment of the conveyor chain by checking the alignment of sprockets, idlers, and other components. Misalignment can cause uneven wear and increase the risk of chain failure.
- Training and Education: Provide proper training to personnel responsible for operating and maintaining the conveyor chain. They should understand the maintenance requirements, safety protocols, and best practices to ensure effective and safe operation.
Following these maintenance requirements will help keep the conveyor chain in optimal condition, minimize downtime, and ensure safe and efficient material handling.
editor by CX 2023-07-26
